Wincharger Forum
May 26, 2019, 04:17:04 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: NEW!  FREE 6V Wincharger Part Diagrams
 
   Home   Help Login Register  
Pages: [1]
  Print  
Author Topic: New 6' Wincharger Props  (Read 28 times)
0 Members and 1 Guest are viewing this topic.
Mike
Administrator
Sr. Member
*****
Posts: 159


Mike Texas USA


« on: April 30, 2019, 01:18:22 PM »

I just finished a batch of 6' props using methods described in an earlier post.  I no longer have access to the Shopbot CNC router so I found a local business with the equipment and provided them with my programs and $75 an hour.  Here's the highlights of these ready to spin props:


Tight vertical grain (clear) Douglas Fir
Machined using 3D CNC router
Hand sanded
3 coats of a quality spar varnish (Epifanes clear gloss)
rough balanced (if needed)
8 mil copper leading edges w/monel staples
final balanced using reproduction Wincharger balance weights
predrilled for Wincharger 6V & and 12V but could be re-drilled for a Parris Dunn or Parmak

I have a couple not spoken for if interested-- $300 ea + $50 for shipping costs (4" tube, ins, fedex ground), lower 48 only.
My contact info can be found at http://www.wincharger.com/index.php/resources/parts-suppliers
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!